How To Clean HVAC Air Ducts And Vents Yourself

cleaning vent

Installing HVAC Air Ducts and Vents is a great investment in your home. They make your home a more comfortable place to live during the extreme cold and hot weather conditions. Like other systems you have in your home, it is necessary to ensure that air ducts and vents are well maintained. One of the simplest ways you can maintain them is by carrying our regular cleaning. It is critical to do the cleaning since dust gets trapped in the systems. The dust does not only affect the efficiency of the system, but it also poses great health risks.  With proper cleaning, it means you will have pure air to breath and enhance its durability.

Cleaning the HVAC Vancouver is something you can do it yourself without the need to hire professional to help. Do it yourself cleaning saves you money you would otherwise spend working with the experts. However, you have to make sure you have the right cleaning tools and skills to do the job perfectly.  To help you do a great job, here are some of the tips for cleaning Kelowna HVAC air ducts and vents yourself.

Steps to clean Air Ducts

Step 1: Get the right equipment and tools

If you do not have the necessary tools, it may be challenging to clean the air ducts in a perfect manner. Therefore, before you start the job, make sure you have the required tools. The great thing is that most of these tools are affordable, so you do not have to spend a lot to acquire them. Besides, if you cannot afford to buy, you can borrow or rent them.  Some of the most critical tools to have include; a vacuum cleaner, brush, screwdriver, paper towels or cleaning clothes and furnace filter.

Step 2: Cover all the supply registers

After collecting all the tools you need, it is time to start the cleaning process. The first step in the cleaning process is to cover all the supply registers with microfiber cloths or paper towels.  Since you are doing a thorough cleaning job, it is advisable to ensure that dust does not go to other parts of your house.  Covering the supply registers is easy since it involves just lifting the grills and covering with paper towels and then replace them.

Step 3: Turn the fan on

Before you commence cleaning the ducts, make sure you turn the fan on.  This makes the dust loosen, making it easy to clean the HVAC Vancouver. However, before turning the fan on, ensure that the heat supply is switched off.

Step 4: Clean the supply registers

With the dust and other elements that have built up on your supply registers, you need to clean them. Depending on the amount of debris that has accumulated, you can make use of a vacuum cleaner or brush to do the cleaning. All you need to do is lift the supply registers and get rid of the dust by sweeping out the debris and dust. Use a long brush to clean the deepest parts of the piping system.

Step 5: Cleaning return air registers

The return air registers are also prone to dust and other forms of dirt.   To do the cleaning, unscrew all of them and remove all the dust that may have built up inside the pipes. A brush with a longer handle can help do a good job since it can reach some of the deepest parts of the cavity.

Step 6: Turn off power

After you have left the fan to run for some minutes, it is advisable to turn off power connected to the entire system.  This is necessary because you will need to reach the main ducts and it is a high risk to do it when the power is still on or as the Kelowna HVAC is running.

Step 7: Unscrew all the air duct covers

Air duct covers are fastened by use of screws or other different types of fasteners. Use a screwdriver to unscrew the grills and covers so that you can access the ducts.   Make use of a cleaning cloth to clean the grates. In case they have a lot of dirt, you can use water or soap.

Step 8: Clean the air ducts

The real HVAC Vancouver cleaning job begins when you reach the air ducts. Air ducts should be cleaned by vacuum cleaning. The vacuum cleaner needs to have a hose, long to reach deepest corners and spots. Make sure you vacuum the air ducts without leaving any part untouched. If you can, invest in a heavy duty vacuum cleaner. This is necessary because the normal air cleaner does not have the required power to perform deep cleaning. You can also make use of a cleaning cloth to clean the interior part of the air duct.

Step 9: Cleaning the blower compartment

Since the power is off, it is safe and possible to reach the blower compartment and air boot. You just need to remove the panels found on the front of the compartment.  There is much dirt and dust that accumulate around the furnace, leading to clogging. The best way to clean the blower compartment is to use a vacuum cleaner. However, take precautions as you clean the furnace fan to avoid damaging it.

Step 10: Replacement of the furnace filter

A furnace filter can get damaged by buildup and clogging of dust. A dysfunctional filter hinders the flow of air and reduces the durability of your Kelowna HVAC.  After you clean the vent and air ducts, it is advisable to replace the furnace filter.  Your contractor will help do the replacement professional y.


Leave a Reply

Your email address will not be published. Required fields are marked *